表一
| S.No | Class | Error Message | Cause of Error |
|---|---|---|---|
| 1 | e_des | ! LaTeX Error: There's no line here to end | Usage of \\ at the end of a long label in 'description' environment |
| 2 | e_center | ! LaTeX Error: There's no line here to end | Usage of \\ after the heading line in 'center' environment |
| 3 | e_foot | ! Argument of \@sect has an extra } | Usage of a fragile command 'footnote' within \section |
| 4 | e_ragged | ! Argument of \@caption has an extra } | Usage of \\ within \raggedright or \raggedleft environment |
| 5 | e_and | ! Extra alignment tab has been changed to \cr | Too many &s in a row of a table or array or eqnarray. |
| 6 | e_cline | ! Extra alignment tab has been changed to \cr | Reference no non existing column in \cline |
| 7 | e_col | ! Extra alignment tab has been changed to \cr. | Usage @ in tabular* environment |
| 8 | e_num | ! Missing number treated as zero | Usage of non numeric parameter after \\ |
| 9 | e_asterisk | Missing * at the end of the line | * is not printed when used without brace after \\ |
| 10 | e_pbox_miss | ! Missing number, treated as zero. | \parbox[t]{} ..Missing argument to parbox |
| 11 | e_mis_circle | ! Missing number, treated as zero. | Missing numeric parameter to \circle |
| 12 | e_list | ! Argument of \lst@next has an extra } | Usage of 1stlisting inside fragile command \parbox |
| 13 | e_capacity | ! TeX capacity exceeded, sorry [input stack size=1500] | Usage of 1stlisting inside fragile command \parbox |
| 14 | e_runaway | Runaway argument? | Generally because of missing braces, e.g \cline{1-2 instead of \cline{1-2} |
| 15 | e_verbatim | Runaway argument? | Usage of verbatim within scope of another command e.g: \ifthenelse |
| 16 | e_undefined | ! Undefined control sequence | Usage of an unknown command |
| 17 | e_footnote | ! Undefined control sequence | Usage of \footnote within \footnote |
| 18 | e_integral | ! Missing { inserted. | Integral bounds are malformed |
| 19 | e_zeta | ! Missing { inserted. | Extra subscript before integral upper limit term |
| 20 | e_bezier | ! Illegal unit of measure (pt inserted). | Missing numeric argument to \qbezier |
| 21 | e_too_bezier | ! Illegal unit of measure (pt inserted). | Too many arguments to \qbezier |
| 22 | e_unit | ! Illegal unit of measure (pt inserted) | \parbox[t]{2} ..Illegal unit of second parameter |
| 23 | e_symfoot | ! LaTeX Error: Counter too large. | More than 9 footnotes when using symbolic footnotes |
| 24 | e_large_count | ! LaTeX Error: Counter too large. | Trying to display a corresponding letter for a counter vallue >26 |
| 25 | e_begin | ! LaTeX Error: Missing \begin{document} | Either text has been placed before \begin{document} or \begin{document} is missing |
| 26 | e_margin | ! LaTeX Error: Missing \begin{document}. | Misuse of \marginsize |
表二
| S.No | Class | Error Message | Cause of Error |
|---|---|---|---|
| 1 | e_fileEnd | ! File ended while scanning use of \end. | Generally caused because of missing a brace |
| 2 | e_end | No message only an asterisk, i.e * | Missing \end{document} |
| 3 | e_illegal | LaTeX Error: Illegal character in array arg | Usage of a letter other than r,l and c in tabular environment |
| 4 | e_tab | ! Misplaced alignment tab character & | Missing \begin{tabular} while using tabular environment |
| 5 | e_backslash | ! Missing \endcsname inserted | Usage of a backslash in front of the name of an environment, e.g \begin{\itemize} |
| 6 | e_delimiter | ! LaTeX Error: Bad math environment delimiter | Missing \right immediately after the array environment |
| 7 | e_right | ! Extra \right | \right has no matching \left OR \end{array} is missing |
| 8 | e_package | ! LaTeX Error: Can only be used in preamble | Usage of \usepackage outside the preamble |
| 9 | e_math | ! Missing $ inserted | Missing a starting or ending \$ in Math mode, e.g m_e instead of \$m_e\$ |
| 10 | e_parameter | ! Illegal parameter number in definition of... | Usage of parameter number greater than the number of parameters defined in \newcommand, e.g \newcommand{\test}[1]{#3} |
| 11 | e_cmd | ! LaTeX Error: Command ... already defined | Trying to define already existing command, e.g \newcommand{\time} |
| 12 | e_caption | ! LaTeX Error: \caption outside float | \caption{...} used outside table environment |
| 13 | e_braces | ! Too many }'s | Missing \begin{table}statement |
| 14 | e_parbox | ! Argument of \@caption has an extra } | Usage of \parbox in a \caption |
| 15 | e_item | ! LaTeX Error: Something's wrong--perhaps a missing \item | Missing \item within enumerate environment |
| 16 | e_fraction | ! Argument of \end has an extra } | Misuse of fraction cmd e.g \frac{1,2} |
| 17 | e_verb | ! LaTeX Error: \verb ended by end of line | Newline after \verb, e.g. \verb*dir* |
| 18 | e_invalid | ! LaTeX Error: Command \end{itemize} invalid in math mode | Missing $ while using math mode in \itemize |
| 19 | e_equation | ! Display math should end with $$ | Usage of $$ inside equation mode |
| 20 | e_column | ! Misplaced \omit | Usage of \newcommand and \multicolumn within tabular environment |
| 21 | e_subscript | ! Double subscript. | Usage of double subscript |
| 22 | e_cls | ! LaTeX Error: File `artcle.cls' not found. | Missing .sty or .cls file |
| 23 | e_nofile | ! LaTeX Error: File `file1.tex' not found. | Missing file1.tex, e.g. \input{file1.tex} |
| 24 | e_sty | ! LaTeX Error: File `anysize1.sty' not found | Use of unavailable package |
| 25 | e_doc_class | ! LaTeX Error: Can be used only in preamble. | Usage of \documentclass outside preamble |
| 26 | e_circle | ! LaTeX Error: Command \circle invalid in math mode. | Usage of \circle in math mode |
| 27 | e_picture | ! Use of \pictur@ doesn't match its definition. | Bad parameter to \picture |
| 28 | e_line | ! Use of \put dosen't match its definition | Badly formatted \line directive |
| 29 | e_line_arg | ! LaTeX Error: Bad \line or \vector argument. | Bad \line parameter |
| 30 | e_counter | ! LaTeX Error: No counter '10' defined. | Counter undefined |
| 31 | e_outer | ! LaTeX Error: Not in outer par mode. | Using figure inside parbox |
| 32 | e_minipage | ! LaTeX Error: Not in outer par mode. | Using figure minipage |
| 33 | e_lost | ! LaTeX Error: Float(s) lost. | Counter undefined |
| 34 | e_lonely | ! LaTeX Error: Lonely \item--perhaps a missing list environment. | Usage of \item outside list environment |
| 35 | e_parg | ! LaTeX Error: Missing p-arg in array arg. | Missing p argument in tabular environment |
| 36 | e_hash | ! You can't use `macro parameter character #' in vertical mode. | Usage of # in normal mode |
| 37 | e_enlarge | ! LaTeX Error: Suggested extra height (14454.0pt) dangerously large. | Too big a number given in \enlargethispage |
| 38 | e_deftab | ! LaTeX Error: Undefined tab position. | Undefined tabbing |
| 39 | e_pushtab | ! LaTeX Error: \pushtabs and \poptabs don't match. | Unequal numbers of push and pop tabs |
| 40 | e_overtab | ! LaTeX Error: Tab overflow. | Too many \= in tabbing environment |
| 41 | e_nest | ! LaTeX Error: Too deeply nested. | Too many list environments |
| 42 | e_eqnarray | ! LaTeX Error: Too many columns in eqnarray environment. | More than three columns in eqnarray |
| 43 | e_classpkg | ! LaTeX Error: \usepackage before \documentclass. | Usage of usepackage before loading documentclass |
| 44 | e_load | ! LaTeX Error: Two \LoadClass commands. | More than one load class command |
| 45 | e_require | ! LaTeX Error: \RequirePackage or \LoadClass in Options Section. | RequirePackage may not be used with \DeclareOption |
| 46 | e_twoclass | ! LaTeX Error: Two \documentclass or \documentstyle commands. | More than one documentclass declaration |
| 47 | e_font | ! LaTeX Error: This NFSS system isn't set up properly. | Invalid font used in \DeclareErrorFont |
| 48 | e_superscript | ! Double superscript. | Usage of two superscripts for the same variable, e.g. 2^3^4 |
| 49 | e_clash_opt | ! LaTeX Error: Option clash for package csvtools. | Clashing options for the same package |
| 50 | e_unknown_opt | ! LaTeX Error: Unknown option ... for package ... | Unkown option for a package |
| 51 | e_hyphenation | ! Improper \hyphenation will be flushed. | Improper parameter to \hyphenation |
| 52 | e_stack_size | ! TeX capacity exceeded, sorry [main memory size=1000000] | Overflow of buffer due to mistake in command definition |
| 53 | e_environment | ! LaTeX Error: Environment ... undefined. | Undefined environment |
| 54 | e_midline | ! LaTeX Error: \< in mid line | Command \< may appear only at the beginning of a line |
| 55 | e_infinite | Goes into infinite loop | Usage of \\strut\hrule |
对表二第10项的额外说明：
想建立一个cnabstract环境：
\newenvironment{cnabstract}[1]{摘\quad 要\par}{\\\noindent 关键词：#1}
出现 ! Illegal parameter number in definition of... 错误。
原因可能是 #1 不能用于环境后的部分，因此改为：
\newenvironment{cnabstract}[1]{\newcommand\keywordscn{#1}摘\quad 要\par}{\\\noindent 关键词：\keywordscn}
就能在正文中使用如下环境：
\begin{cnabstract}{keywords}
abstract
\end{cnabstract}
